Origin	China
Model Number	TC-1500-T-2S

Products Information

Main Features:
1. Open vertical mode, horizontal injection for set pieces forming soles.
2. Nitride screw, feeding pipe, high torque hydraulic motor drive, multi-section injection press, good plastic performance
3. Straight heavy duty lock mould cylinder, speedy clamp, low-pressure safety lock mould, abnormal auto open mould, multi-pressure control,high safety, improve the mould life.
4. Electric protection device, no misrse, and guarantee the operators' safety
5. Auto error display, easy and fast maintenance
6. Electric control and hydraulic pressure use branded accessories which are quiet, precise and durable
7. Multi-section temperature control, multi-section injection pressure, emitting speed, counter pressure neutral adjustment, applicable to precise molding of plastic accessories
8. The Series may be purchased with a shuttle table or with a single mold slid to move the work into an open area for ease of loading, unloading or autmation through the use robotics or special equiment.

TC-1000-T-1S
Machine Type		Unit	TC-1000-T-1S		TC-1200-T-1S		TC-1500-T-1S		TC-2000-T-1S
Emitting system	Screw Diameter	mm	??0	??5	??0	??0	??5	??5	??5	??0
	Injection Pressure	kg/cm2	2011	2001	2011	1287	2001	1339	1613	1355
	Theoretical Shot Volume	cm3	220	302	220	343	302	451	593	706
	Max Shot Veight(PS)	g	198	271	198	308	271	406	550	650
		oz	7.7	9.5	7.7	10.8	9.5	14.3	19.4	22.9
	Injection Rate	cm3/sec	110	110	110	154	110	164	111	133
	Screw Stroke	mm	175		175		190		190
	Screw Speed Max	rpm	0-160		0-160		0-186		150
	Nozzle Contact Force	tons	7.2		7.2		7.2		7.2
	Nozzle Retraction Stroke	mm	250		250		250		250
	Number of Temperature Control	–	4+1		4+1		4+1		4+1
Locking-model system	Clamping Force	tons	100		120		150		200
	Opeming Force	tons	7		7.3		7.5		7.5
	Platen Size	mm	650×650		690×690		790×790		890×1030
	Distance Between Tie Bare	mm	360×360		400×400		470×470		570×710
	Min Mold Height	mm	230		250		250		300
	Opening Stroke	mm	250		300		300		350
	Mar Open Daylight	mm	480		550		550		650
	Ejector Force	tons	3.3		3.3		4.6		6.2
	Ejector Stroke	mm	50		50		50		165
	Radio Tsui center heinght	mm	150±25		150±25		150±25		175±25
	From the comer to state radio Tsui Min	mm	130		130		130		150
Sliding-model system	Slide Stroke	mm	650		680		750		750
	Station Clearance	mm	±0.02		±0.02		±0.02		±0.02
Oil-press power system	Max Hydraulic Pressure	kg/cm2	140		140		140		140
	Pump Output	liters/min	94		94		112		112
	Oil Reservoir Capacity	liters	420		450		500		610
	Cooling Water Consumption	liters/hr	1400-1600		1400-1600		1800-2000		1800-2000
	Pump Motor Power	kw	14.9		14.9		18.5		18.5
	Barrel Heating Power	kw	7.5		7.5		10.5		12
	Total Wattage	kw	25.4		25.4		28.7		30.5
Other	Machine Weight	tons	5.3		6.5		7.2		8.2
	Maching Dimensions	m	4.3*1.8*3.3		4.5*1.8*3.5		4.8*1.9*3.6		4.8*1.9*3.6
	Shipping Weight	tons	—		—		—		—
	Shipng Measurements	m	—		—		—		—
Specifications are subject to change without prior notice.